POLY-CELL BUBBLE MAKING MACHINE

spcs2000.JPG (17842 bytes)

Special Features:

  1. Manufacturing in "ONE PROCESS" from LDPE pellet directly.
  2. Special design in extrusion screw performs highly mixing and high extrusion. It is effectual to increase the quality of transparent and strength of the bubble film.
  3. Advanced design in T-die ensures even film extruded, either thick or thin.Even for TWO-PLY type, the thickness of the films adjusted separated by choke bar.
  4. Particular device of forming roll compeleted with thermostatically cooling system makes the films sealed and the bubble forming excellentlly. It also ensure the film dry and even. (Easy and quick in forming roller changed of different bubble size.)
  5. Winder of automatic or semi-automatic type performs the control operations of length, tension, and shaft converse.
  6. Principally, We-POLYPRISE INC, have 15 experiences in poly-cell products and machinery manufacture. We offer particular design and different type of machine based on various demands. As well as the best professional technics, quality, and services.

Specification:

MODEL SPCS-1250 SPCS-1500 SPCS-1830 SPCS-2000 UNIT
Type Three-ply poly-cell bubble ¡@
Resin LDPE ¡@
Sheet Width 1250 1500 1830 2000 mm
Film Thickness 0.02~0.15 0.02~0.15 0.02~0.15 0.02~0.15 mm
Production Speed ~35 ~35 ~35 ~35 M/min
EXTRUDER
Screw Diameter 90, 65 100, 75 100, 75*2 100, 80*2 mm
Screw L/D 28:1 28:1 28:1 28:1 ¡@
Main Motor (DC/Inverter) 40, 30 50, 30 50, 30*2 50, 40*2 HP
Barrel Heating Capacity 34, 26 38, 30 38, 30*2 38, 32*2 KW
Temperature Control 4, 3 5, 3 5, 3*2 5, 4*2 zone
Brake Motor 1*2 2*2 2*3 2*3 HP
Extrusion Output 150 170 250 300 kg/hr
T-DIE
Type 2 lips*1, single lips*1 single lips*3 set
Lip Width 1370 1625 1955 2125 mm
Heating Capacity 30, 14 33, 18 35, 3 40, 3 KW
Temperature Contorl 5*2 7*2 9*3 9*3 zone
FORMER
Forming Roller Standard bubble size 10mm Ø * 4mm high 1 set ¡@
Silicon Rubber Roller, Ø*L 300*1370 300*1625 300*1955 300*2125 mm
Lamination Roller 300*1370 300*1625 300*1955 300*2125 mm
Cooling Roller 300*1370 300*1625 300*1955 300*2125 mm
Driving Motor(DC/Inverter) 5 5 7.5 10 HP
Motor of Vacumn Pump 5 7.5 10 15 HP
TAKE-UP UNIT
Take-up Roller, Ø*L 150*1370 150*1625 200*1955 200*2125 mm
Drive Motor 2 2 3 3 HP
Edge Trimmer By pneumatic trimming blade ¡@
Trimming Blower 1 1 2 2 HP
WINDER
Type Semi-automatic two air shafts turret type ¡@
Winding Motor, DC 1*2 1*2 2*2 2*2 HP
Wind-up Diameter 1200 1200 1200 1200 mm
Tension Control Adjustable electronic Control ¡@
Rotating Drive Brake Motor 1 1 2 2 HP

!!We reserve the right to make technical modification!!

¡@

¡@